UVT - Overhead stage machinery - Hovedsal, DKS-sal and Multirom

Call for competition published on TED on 12 Nov 2026 by Stiftelsen Unge Viken Teater (Norway), CPV 42411000 Pulley tackle and hoists. Tenders are accepted until 11 Dec 2026.

Open on TED Tender documents

Description

Stiftelsen Unge Viken Teater is procuring complete overhead stage machinery for Hovedsal (main hall), DKS-sal (DKS hall) and Multirom (multi-purpose room) at Kirkegata 11, 2000 Lillestrøm. The scope includes engineering design, manufacture, delivery, installation, control systems, cabling for machinery functions, setting-up and adjustment, testing, documentation and training. Hovedsal: 14 motorised batten systems and 3 fixed battens, with a payload of 300 daN (3.00 kN) per batten. The motorised batten systems shall hold and move scenic loads above persons as independent machine axes, each with its own load, UC3. The control system shall support cues/scenes and meet the UC3 operational requirements of the main delivery in accordance with H-09. Permitted operating functions shall be consistent with the intended use of the connected machinery. DKS-sal: 12 motorised hoists, each with a capacity of 500 kg, and three truss frames, each measuring 7,000 × 2,500 mm. Multirom: 8 motorised hoists, each with a capacity of 500 kg, and two truss frames measuring 5,750 × 4,500 mm and 5,500 × 4,500 mm. Each frame shall be lifted by four hoists operating as a coordinated group for UC2. Raising and lowering shall take place with the danger zone cordoned off and clear of persons. Static holding of loads above persons shall be documented for the machinery's normal load-bearing system in all three rooms. Options include higher use cases (UC), three additional motorised batten systems in Hovedsal, pantographs for cable management to all three truss frames in DKS-sal and both truss frames in Mult

Lots (1)

Other CPV codes

• 51511100 Installation services of lifting equipment